How to fix a jammed garbage disposal

A jammed garbage disposal can be a frustrating experience for anyone. Fortunately, fixing a jammed garbage disposal is not as difficult as it may seem. Here's a step-by-step guide on how to fix a jammed garbage disposal:

Step 1: Turn off the power supply
Before attempting to fix the jammed garbage disposal, it's important to turn off the power supply to the unit. This can be done by unplugging it from the electrical outlet or by turning off the circuit breaker that powers the unit.

Step 2: Locate the reset button
Most garbage disposals come with a reset button located at the bottom of the unit. Look for a small red or black button and press it to reset the unit.

Step 3: Use a hex key
If the reset button doesn't work, you can use a hex key to manually turn the blades of the garbage disposal. Insert the hex key into the hole at the bottom of the unit and turn it back and forth to loosen any debris that may be causing the jam.

Step 4: Remove the debris
If the hex key doesn't work, you may need to remove the debris manually. Use tongs or pliers to reach into the disposal and remove any objects that may be causing the jam. Be sure to turn off the power supply before attempting to remove any debris.

Step 5: Check the blades
After removing the debris, check the blades to ensure they are not damaged or bent. If the blades are damaged, they may need to be replaced.

Step 6: Turn on the power supply
Once you have fixed the jammed garbage disposal, turn on the power supply and test the unit to ensure it's working properly.

In conclusion, fixing a jammed garbage disposal can be done in a few simple steps. Remember to always turn off the power supply before attempting to fix the unit and be careful when removing any debris. If you're unsure about how to fix a jammed garbage disposal, it's always best to call a professional plumber for assistance.