Rather have a pro do it for you?
| Tools and Supplies to install a garbage disposal | ||||
|---|---|---|---|---|
| 1 | Garbage disposal unit | |||
| 2 | Plumber's putty | |||
| 3 | Plumber's tape | |||
| 4 | Screwdriver set | |||
| 5 | Adjustable wrench | |||
| 6 | Channel-lock pliers | |||
| 7 | Hammer | |||
| 8 | Hacksaw | |||
| 9 | Electric drill | |||
| 10 | Hole saw bit | |||
| 11 | Wire stripper | |||
| 12 | Wire connectors | |||
| 13 | Electrical cable | |||
| 14 | Safety gloves | |||
| 15 | Safety goggles | |||
How to install a garbage disposal
Easy Steps to Install Your Own Garbage Disposal: A Beginner's Guide
Installing a garbage disposal can be a great way to improve the functionality of your kitchen sink. Here's a step-by-step guide to help you install your new garbage disposal like a pro.
Step 1: Turn off the Power
Before you begin any work, make sure to turn off the power to the area where you will be working. This is usually done by turning off the circuit breaker that controls the power to the kitchen.
Step 2: Remove the Old Disposal
Remove the old disposal by disconnecting the drain and the mounting assembly. You'll need to loosen the mounting assembly by turning it counterclockwise with a wrench. Once it's loose, you can lift the old disposal off of the mounting assembly.
Step 3: Install the Mounting Assembly
Install the mounting assembly by placing the gasket and mounting ring onto the sink flange. Then, insert the mounting bolts and tighten them with a wrench. Make sure the mounting assembly is secure and level.
Step 4: Install the Disposal
Install the disposal by attaching the mounting assembly to the disposal unit. Make sure to follow the manufacturer's instructions for your specific disposal model.
Step 5: Connect the Drain
Connect the drain by attaching the drain pipe to the disposal unit's discharge tube. Use a wrench to tighten the connection securely.
Step 6: Connect the Power
Connect the power by attaching the electrical wires to the disposal unit. Make sure the wires are connected securely and follow the manufacturer's instructions for your specific disposal model.
Step 7: Test the Disposal
Test the disposal by turning on the power and running water through the sink. Make sure the disposal is running smoothly and there are no leaks.
Congratulations, you've successfully installed your new garbage disposal! Remember to always follow the manufacturer's instructions for your specific disposal model and to turn off the power before beginning any work.
